Analysis of plastic products anti-static PVC board construction specifications
Plastic products direct paving guide/anti-static pvc board construction code
A. Materials, equipment and tools
1. Materials used for construction shall meet the following requirements:
(1), Posting panel: physical properties and appearance dimensions shall meet the requirements of "General Code for Anti-static Posting Panel" SJ/T11236, and have permanent anti-static performance. Its volume and surface resistance: the resistance value of the electrostatic conductive panel should be lower than 1.0× 106 Ω .
(2), conductive adhesive: should be non-water-soluble adhesive, resistance value should be less than the resistance value of the panel, bond strength should be greater than 3× 106 N/m2
(3), plastic electrode: should use uniform color, outer diameter consistent, flexible material.
(4), conductive ground network with copper foil: thickness should not be less than 0.05mm, width should be 20mm.
2. The veneer should be stored in a ventilated and dry warehouse, away from acid, alkali and other corrosive substances. When handling, it should be lightly loaded and unloaded, and it is strictly prohibited to impact with force. It is strictly prohibited to place it outdoors in the sun and rain.
3. Common construction equipment (including tools) should include slotting machine, plastic welding torch, rubber hammer, cutter, ruler
Two, general provisions
1. Anti-static polyvinyl chloride (pvc) ground construction content includes basic treatment, grounding system installation, glue configuration, anti-static polyvinyl chloride (PVC) panel (hereinafter referred to as the panel) laying and cleaning construction, testing and quality inspection.
2. The temperature of the construction site should be at 10— 35 ¡æ; Relative humidity is not more than 80%; Ventilation should be good and ensure that the construction of other indoor projects should be basically finished.