255 companies have been found to have violated environmental laws in the processing of imported waste

1. Mixing waste lead-acid batteries with non-hazardous waste for storage;

2. Stacking waste engine oil in the open air and causing leakage of waste engine oil.

1. Two electric melting furnaces have been built in the factory area, but the environmental impact assessment procedures have not been performed;

2. The solid waste generated after dismantling has not been stored in accordance with regulations;
3. The record book for the processing and utilization of imported waste is incomplete;
4. The industrial solid waste declaration and registration system has not been implemented.

1. Hazardous waste storage sites are not marked with hazardous waste;
2. No harmless disposal measures have been taken for solid waste that has not been used or cannot be used yet.

1. The emergency plan for sudden environmental incidents has not been filed, and the environmental risk assessment has not been carried out;
2. The industrial solid waste generated has not been reported and registered to the environmental protection department.

1. The copper rice machine production line is suspected of being built without approval;
2. The emergency plan for sudden environmental incidents has not been filed, and the environmental risk assessment has not been carried out.

1. The original approval number of copper rice machines was 2, and 1 copper rice machine was actually added; the original approval number was that there was no process water point in the production process, but there was actually a wet screening copper removal process. The production equipment and process are inconsistent with the environmental impact assessment and the corresponding equipment has been put into use;
2. The emergency plan for sudden environmental incidents was not formulated in accordance with regulations, and it was not filed with the local environmental protection department.

1. The dust collection pipes of the two crushers are not connected to the bag-type dust collector. The environmental impact assessment requires that the dust should be collected centrally and discharged through the bag-type dust collector (the collection pipe of one hood is not connected to the bag-type dust collector, and the other is not equipped with an exhaust hood); the monitoring port of the exhaust gas emission port of the extruder is not closed;
2. The production process of a copper rice machine does not comply with the environmental impact assessment documents.

1. The sewage on the ground in the south side of the stockpiling area flows directly out of the stockpiling area, and the cleaning water outlet of the waste gas pollution control facility on the south side of the factory flows out of the factory building through the ground;
2. Some imported raw materials are piled up in the open air;
3. The emergency plan for sudden environmental incidents has not been filed.

1. The hazardous waste temporary storage room is not marked in a standardized manner, and the hazardous waste site is not fully marked. There is no transfer record in the hazardous waste ledger. There are 2 barrels of waste activated carbon piled on site, which does not match the 3 barrels recorded in the hazardous waste ledger;

2. There is no hazardous waste plan management book.

1. There is obvious smoke emission from the 380m³ iron-making furnace and iron tapping;
2. Some coarse-grained materials in the material yard were not completely covered, and there were many fine-grained materials piled up in the yard that were not covered, resulting in obvious dust pollution on site; some conveyor belts in the yard were not closed.

Part of the coal slag was piled in the open air, and the "three prevention" measures were not taken.

1. Failure to strictly implement the business record book system (the processing and utilization of imported solid waste, sales of products using imported solid waste as raw materials, utilization and disposal of inclusions in imported solid waste, and utilization and disposal of solid waste generated in the production process are all filled in once a month, not filled in daily, and there are no original records);
2. Failure to strictly implement the daily environmental monitoring system (only providing the monitoring report on October 21, 2016, and the monitoring frequency of characteristic pollutants (particulate matter, non-methane total hydrocarbons) does not reach at least once a quarter).

1. Failure to implement the import waste management record book system;
2. Failure to strictly implement the daily environmental monitoring system (only one monitoring has been conducted since July 2016, and the characteristic pollutant non-methane total hydrocarbons have not met the requirement of at least one monitoring every quarter).

1. Some waste activated carbon and waste oil barrels with organic oil residues were piled up in the open air, and no hazardous waste signs were set up;
2. The bucket for collecting cooling water in the high-pressure granulation workshop had a private discharge outlet, and it was found that some cooling water overflowed through the discharge outlet on site;
3. The emergency plan for sudden environmental incidents has not been filed.

1. Failed to provide the original weighing scale and production record sheet, and the operating records were incomplete. The records since 2016 only provided the product production quantity records for the first quarter of 2016, and the monitoring frequency was insufficient;
2. Failed to set up hazardous waste identification signs, failed to declare and register hazardous wastes as required, and failed to transfer and dispose of hazardous wastes as required;
3. The emergency plan for sudden environmental incidents was not filed.