The anti-corrosion system of polyethylene anti-corrosion adhesive tape is composed of anti-corrosion tape, protective tape, patch tape and primer.

Product Introduction

The adhesive tape is a strip-shaped anti-corrosion material made of polyethylene base film, thermally compounded with an adhesive layer mainly composed of butyl rubber, and co-extruded. It has the characteristics of good insulation, excellent anti-corrosion effect, high mechanical strength, collision resistance, aging resistance, low water absorption, convenient construction, safety and hygiene, wide application range and long service life. It is widely used in various pipeline projects and facilities such as petroleum, natural gas, petrochemical, electric power, metallurgy, urban gas pipeline network, water supply, etc. The external anti-corrosion of metal pipes is efficient and long-lasting. It is widely used in the external anti-corrosion of buried metal pipes in petrochemical, natural gas coal and other projects.

Specifications and models

Reinforced polyethylene adhesive tape for pipeline reinforcement and anti-corrosion: composite polyethylene anti-corrosion tape, reinforced polyethylene adhesive tape, polyethylene anti-corrosion adhesive tape, polyethylene cold wrapping tape, referred to as reinforced tape, polyethylene adhesive tape, polyethylene tape POLYETHYLENE TAPE, also known as pipeline anti-corrosion tape, anti-corrosion tape, cold wrapping tape, PE anti-corrosion tape, PE TAPE, IDEAL TAPE. The product performance reaches the level of similar international products, and the quality indicators meet the standard requirements of American AWWA C214 and national SY/T0414.

The product has the characteristics of cold wrapping tape, convenient construction, no environmental pollution, excellent anti-corrosion performance, long service life, low comprehensive cost and other advantages. It is widely used in the external corrosion protection of steel pipelines in pipeline projects such as petroleum and natural gas, petrochemical, urban gas, power water supply, metallurgy and shipbuilding.

Polyethylene anticorrosion tape/Polyethylene anticorrosion adhesive tape/Polyethylene cold wrap tape:

Polyethylene anticorrosion adhesive tape product series specifications: (inner tape, outer tape, patch tape, primer)

Polyethylene anticorrosion tape Inner wrap tape T100 inner tape series:

T140: thickness 0.40mm, width 50, 75, 100, 150, 230mm;

T150: thickness 0.50mm, width 50, 75, 100, 150, 230mm;

T180: thickness 0.80mm, width 50, 75, 100, 150, 230mm;

Polyethylene protective tape Outer wrap tape T200 outer tape series:

T240: thickness 0.40mm, width 50, 75, 100, 150, 230mm;

T255: thickness 0.55mm, width 50, 75, 100, 150, 230mm;

T280: thickness 0.80mm, width 50, 75, 100, 150, 230mm;

Polyethylene joint wrap tape T300 joint wrap tape series:

T360: thickness 0.60mm, width 50, 75, 100, 150mm;

T380: thickness 0.80mm, width 50, 75, 100, 150mm;

Primer P00 primer series:

P19: solid content 19%;

P27: solid content 27%.

The product specifications are complete and can meet the needs of various pipeline anti-corrosion.

Property classification

Polyethylene anti-corrosion cold wrapping tape is divided into composite anti-corrosion tape and polyethylene modified asphalt anti-corrosion tape according to the product material and anti-corrosion structure.

Polyethylene modified asphalt anti-corrosion tape is composed of polyethylene substrate, modified high-viscosity asphalt and isolation film. This tape has the characteristics of thick adhesive layer, easy winding, non-slip, and high viscosity. A single layer of tape winding can achieve ordinary or enhanced anti-corrosion required by SY/T0414-2007 standard. It changes the need for multi-layer winding of traditional tapes, reduces the impact of human factors on the anti-corrosion quality during the anti-corrosion operation, and reduces construction costs.

Plastic Industry Video