Warm Global Customers
With China Plastic Machinery
With China Plastic Machinery
Nylon rod is an important engineering plastic that can replace the wear-resistant parts of mechanical equipment and replace copper and alloy as wear-resistant parts of equipment. It has good toughness, strong wear resistance, oil resistance, shock resistance, tensile strength, good bending strength, low water absorption, good dimensional stability, etc., so it is used to process various wear-resistant and high-strength parts. It is suitable for making wear-resistant parts, transmission structural parts, household appliance parts, automobile manufacturing parts, screw textile machinery parts, chemical machinery parts, and chemical equipment. Such as turbines, gears, bearings, impellers, cranks, instrument panels, drive shafts, valves, blades, screws, high-pressure washers, screws, nuts, seals, shuttles, sleeves, sleeve connectors, etc.
Nylon rods are divided into extrusion and casting according to different production processes.
Extruded nylon rods
Nylon 6 (white): This material has the most superior comprehensive properties, including mechanical strength, stiffness, toughness, mechanical shock absorption and wear resistance. These properties, together with good electrical insulation and chemical resistance, make nylon 6 a "general-purpose" material for the manufacture of mechanical structural parts and maintainable parts.
Nylon 66 (cream): Compared with nylon 6, it has better mechanical strength, stiffness, heat and wear resistance, and creep resistance, but its impact strength and mechanical shock absorption performance are reduced, making it very suitable for automatic lathe machining.
Nylon 4.6 (reddish brown): Compared with ordinary nylon, nylon 4.6 is characterized by strong rigidity retention, good creep resistance, and better resistance to heat aging over a wider temperature range. Therefore, nylon 4.6 is used in the "higher temperature area" (80-150 ¡æ) where nylon 6, nylon 66, POM and PET cannot meet the requirements in terms of stiffness, creep resistance, heat aging resistance, fatigue strength and wear resistance.
Nylon 66+GF30 (black): Compared with pure nylon 66, this nylon is reinforced with 30% glass fiber, and its heat resistance, strength, stiffness, creep resistance, dimensional stability, wear resistance and other properties are improved. Its maximum allowable use temperature is higher.
Nylon 66+MOS2 (gray black): This nylon is filled with molybdenum disulfide. Compared with nylon 66, its rigidity, hardness and dimensional stability are improved, but its impact strength is reduced. The grain formation effect of molybdenum disulfide improves the crystal structure, so that the material load-bearing and wear resistance are improved.
Casting nylon rod is also called MC nylon: English name Monomer casting nylon, Chinese name monomer casting nylon. "Plastic replaces steel, excellent performance", it has a wide range of uses. It has many unique properties such as light weight, high strength, self-lubrication, wear resistance, corrosion resistance, insulation, etc. It is a widely used engineering plastic, almost in all industrial fields.
Cast Nylon Rod
MC Nylon (Ivory White): The properties of unmodified cast nylon 6 are very close to nylon 66. It has good comprehensive properties, high strength, toughness and hardness, creep resistance, wear resistance, heat aging resistance, good machining performance, etc.
MC901 (Blue): This modified nylon 6 has a striking blue color, higher toughness, better flexibility, and fatigue resistance than ordinary cast nylon, proving to be an ideal material for gears, racks and transmission gears.
PA6+ Oil (Green): This cast nylon 6 is truly self-lubricating nylon. It is specially developed for manufacturing parts that cannot be lubricated, have high loads and run at low speeds. It has greatly broadened the application range of nylon. It has a lower friction coefficient than ordinary nylon (can be reduced by 50%) and improved wear resistance (can be increased by 10 times).
PA6+ Molybdenum Disulfide (Gray-Black): Contains molybdenum disulfide powder, which can improve its load-bearing capacity and wear resistance without affecting the impact and fatigue resistance of unmodified cast nylon. It is widely used to manufacture gears, bearings, star wheels and sleeves.
PA6+ Solid Lubricant (Gray): It adopts a patented cast nylon 6 formula and contains solid lubricants. This material has self-lubrication, excellent friction, outstanding wear resistance and pressure-speed capability (5 times higher than ordinary cast nylon). It is particularly suitable for high-speed running and non-lubricated moving parts, and is a perfect supplement to oil-containing nylon.
High mechanical strength, rigidity, hardness, toughness, good aging resistance, good mechanical vibration reduction ability, good sliding property, excellent wear resistance, good machining performance, no creeping phenomenon when used for precise and effective control, good wear resistance and good dimensional stability.
Widely used in chemical machinery, anti-corrosion equipment gear and parts. Wear-resistant parts, transmission structural parts, household appliance parts, automobile manufacturing parts, screw rods to prevent mechanical parts, chemical machinery parts, chemical equipment, etc.
Nylon rods have good toughness, strong wear resistance, oil resistance, shock resistance, good tensile and bending strength, low water absorption, good dimensional stability, etc., so they are used to process various wear-resistant high-strength parts. The product has a wide range of uses. It is a good material for replacing steel, iron, copper and other metals with plastics. It is an important engineering plastic; cast nylon widely replaces wear-resistant parts of mechanical equipment and replaces copper and alloys as wear-resistant parts of equipment. It is suitable for making wear-resistant parts, transmission structural parts, household appliance parts, automobile manufacturing parts, screw rods to prevent mechanical parts, chemical machinery parts, and chemical equipment. Such as turbines, gears, bearings, impellers, cranks, dashboards, drive shafts, valves, blades, screw rods, high-pressure washers, screws, nuts, seals, shuttles, sleeves, sleeve connectors, etc.
Generally speaking, nylon rods made of nylon 1010 or MC nylon are more wear-resistant, and the most wear-resistant are nylon rods with wear-resistant modifiers added. A type of nylon 1010 modified plastic made by using nylon 1010 resin as the (bonding) base material, adding various friction-reducing materials and mixing through an extruder. It has a lower friction coefficient than pure nylon 1010 resin, a higher PV value and better friction and wear resistance, and better self-lubrication.
If you are interested in our company and machine, feel free to contact our sales engineer. We will contact you as soon as possible.